Bespoke Low Temperature Heating Design in Epsom

Heating system design for heat pumps, boilers, underfloor heating and modern home upgrades in Surrey and South London

Hot water cylinder and Bespoke Low Temperature Heating Design in Epsom
Bespoke Low Temperature Heating Design in Epsom

Heating design that starts with your home

A good heating system is not just about choosing a boiler, heat pump or underfloor heating. It is about how the whole system works together.

Evo looks at your property, heat demand, hot water use, radiators, pipework, insulation, controls and future plans before recommending the best approach. This helps create a heating system that feels comfortable, works efficiently and makes sense for your home.

Piotrek the installers from EVO next to the van

Trusted by homeowners across Epsom, Surrey & South London

The technical side matters, but so does the experience of having work carried out in your home. From the initial survey and system design through to installation and handover, EVO keeps things clear, professional and straightforward.

Average customer rating: 5.0
Rated 5 out of 5
See what homeowners have to say about working with us.

What is low temperature heating?

Low temperature heating is designed to keep your home warm using lower water temperatures than a traditional heating system. This can work especially well with air source heat pumps, underfloor heating and correctly sized radiators.

Instead of relying on very hot water for short bursts of heat, a low temperature system is designed to run more steadily, helping improve comfort and reduce wasted energy.

Expert Low-Temperature Heating System in Epsom, South London
Bespoke Low Temperature Heating Design in Epsom

Precision-Designed Heat Pump Installation in Epsom

This renovation project in Epsom demonstrates why heat pump installations should always begin with engineering, not guesswork. Although another installer recommended a much larger unit, our heat loss calculations showed the property required only a 5kW heat pump.

We designed and installed a complete Vaillant aroTHERM Plus system with a 200L hot water cylinder, whole-house wet underfloor heating and weather-compensated controls, all operating at an efficient 38°C flow temperature. The project also included a complete plumbing upgrade, VDI 2035 water treatment, magnetic filtration and a dedicated electrical supply to maximise long-term reliability.

The result is a highly efficient heating system that delivers outstanding comfort while helping to keep running costs to a minimum.

Evo Heating & Renewables is working with the UK's most trusted renewable manufacturers

Heating Systems Design in South London

What Evo can design

Heat pump system design

For homeowners planning to move towards efficient, low-carbon heating.

Boiler system design

For homes where a modern boiler is still the right option.

Underfloor heating design

For even, comfortable heating that works beautifully with lower flow temperatures.

Radiator sizing and upgrades

To help existing rooms work better with low temperature heating.

Hot water and cylinder planning

To make sure the system suits your household’s hot water needs.

Heating controls

Heating controls To make the system easier to use and more efficient day to day.

Oil Boiler to Heat Pump Conversion in Epsom, South London
Bespoke Low Temperature Heating Design in Epsom

Oil Boiler to Heat Pump Conversion in Epsom, Surrey

Replacing an old oil-fired heating system isn’t simply about changing the boiler. For this detached home in Epsom, we completely redesigned the heating system to suit a modern Vaillant aroTHERM Plus 7kW heat pump.

Following a full heat loss assessment, we upgraded three radiators, replaced sections of restrictive single-pipe heating with a modern two-pipe system and converted the property from a gravity-fed hot water system to a pressurised unvented cylinder. We also power flushed the system, filled it with demineralised water to VDI 2035 standards and installed magnetic filtration to protect the new heat pump for years to come.

The completed installation provides lower running costs, improved comfort and a heating system engineered to deliver maximum efficiency throughout every season.

Featured Project

Our Bespoke Heating Design Projects in Epsom

Heat Pump service in Epsom
Heat Pump service in Epsom
A year one service of a heat pump that was fitted in Epsom. This needed a good clean due to the building works undertaken at the property over the last 12-months.
Get in touch
Heat Pump installation in Epsom
Heat Pump installation in Epsom
A new Vaillant aroTHERM heat pump in Epsom.
Get in touch
Heat Pump in Epsom
Heat Pump in Epsom
Another Vaillant aroTHERM plus installation in Epsom
Get in touch
Evo Heating & Renewables

Why choose Evo for your heating system design

Designed around your property
Clear advice before installation
Heat pump, boiler and underfloor heating knowledge
Practical, honest recommendations
Focus on comfort and efficiency
Support from design through to aftercare
Vaillant Heat Pump installation in Epsom

AIR SOURCE HEAT PUMP
aroTHERM plus


A popular air source heat pump for modern homes, offering quiet operation, strong performance and reliable heating for everyday comfort.

Vaillant EcoTec Plus Epsom

BOILER INSTALLATION Vaillant EcoTec Plus


A modern boiler option for homes where a heat pump may not be the right fit yet, with efficient heating, reliable hot water and up to 10 years guarantee.

UNDERFLOOR HEATING Low Temp Heating


Comfortable, even heating designed to work beautifully with heat pumps, modern boilers and low temperature heating systems.

Why Choose us

Bespoke heating systems designed around
your Epsom home

No two homes are the same. That’s why Evo Heating & Renewables looks at your property, heating needs, hot water use, existing system and future plans before recommending the right setup. From heat pumps and boilers to underfloor heating, we design systems that are clear, practical and built around your home.

Boiler upgrade scheme

ASHP grant available for Surrey homes

The Boiler Upgrade Scheme Explained

Heat pump grants for homes in Epsom, Surrey & South London

If you are considering an air source heat pump, the Boiler Upgrade Scheme could help reduce the upfront cost of your installation.

Most eligible air-to-water heat pump installations can currently receive £7,500 towards the cost of the system and installation.

Some off-gas-grid properties replacing oil or LPG heating may qualify for up to £9,000, depending on the property, existing heating system and current scheme rules.

At Evo Heating & Renewables, we can help you understand whether your home may be suitable for a heat pump, what grant support could apply and what the next steps look like.

Vaillant Heat Pump installation in Epsom

AIR SOURCE HEAT PUMP
aroTHERM plus


A popular air source heat pump for modern homes, offering quiet operation, strong performance and reliable heating for everyday comfort.

Viessmann ASHP installation in Epsom

AIR SOURCE HEAT PUMP
Viessmann Vitocal 250-A


A premium heat pump designed for efficient home heating and hot water, with smart technology to help keep your system running smoothly.

NIBE ASHP installation in Epsom

AIR SOURCE HEAT PUMP
NIBE


A flexible heat pump option for homes looking to move towards cleaner, low-carbon heating with reliable year-round performance.

Why Choose us

The right heat pump system for your Epsom home

No two homes are the same. That’s why Evo Heating & Renewables looks at your property, heating needs, hot water use and budget before recommending the right heat pump system. Our aim is to make the process clear, practical and honest, so you know what will work for your home before anything is installed.

Heat pump installation cost in South London
Heating Systems Design in South London

Heat pump, boiler or underfloor heating?

Not every home needs the same solution. Some properties are well suited to a full heat pump system. Others may benefit from a new boiler, underfloor heating, radiator improvements or a phased plan towards low temperature heating.

Evo will explain the options clearly so you can make a confident decision based on your home, budget and long-term plans.

Looking for heat pump installation in Epsom?

Evo Heating & Renewables helps homeowners understand how air source heat pumps work, what to expect from the installation process, and how to choose the right system for their property. From grants and running costs to system design and installer support, we are here to help you make a more confident move towards low carbon heating.

Get started with heating design in Epsom

Get in touch

EVO Heating & Renewables

Let's Talk

Office Phone : 07342 241808  Monday - Friday 09:00 - 15:20

Email Support

Please use the form or existing customers can respond to our previous email

Head Office

EVO Heating & Renewables
30 Andover Cl,
Epsom KT19 9DB

Follow our social networks

South London Heat Pump installations

Our services also include

Boiler Installations
Boiler Servicing
Underfloor Heating
Heat Geek Installations
FAQ

Got a question about low temperature heating design?

Here are some of the things we’re most often asked by customers across Manchester. If you’re still not sure about something, just give us a ring, we’re always happy to help.

Yes, many homes can replace a gas boiler with an air source heat pump, but the system needs to be designed properly. Evo will look at your radiators, hot water demand, insulation and available space before recommending the best setup for your home. Some properties may also need a new cylinder or selected radiator upgrades.

Yes, underfloor heating can work really well with an air source heat pump because both are designed to run at lower flow temperatures. This can help the system heat your home more evenly and efficiently. Evo Heating & Renewables can advise whether underfloor heating is suitable as part of your heat pump installation.

 

If you are not ready to install a heat pump yet, keeping your existing boiler serviced is still important. A boiler service can help keep your current heating system safe and reliable while you explore your future heating options.

A Heat Geek approach focuses heavily on system design, low flow temperatures and long-term efficiency. Rather than simply fitting a heat pump, the aim is to design a system that works properly for the property. This usually includes heat loss calculations, radiator checks and careful setup.

Not always. Some homes can use existing radiators, while others may benefit from larger radiators or underfloor heating to improve performance. Evo will check this during the design stage so you know what is needed before installation starts.

Yes. If you are unsure whether to choose a new boiler or move to an air source heat pump, Evo can help you understand the pros, cons and likely suitability of each option. The right choice depends on your home, budget, heating habits and long-term plans.

 

Yes, a heat pump should usually be serviced annually to keep it running safely and efficiently. Regular servicing helps protect performance, spot issues early and keep the system working as it should.

Yes. A heat pump installation can often be planned alongside other upgrades such as underfloor heating, radiator improvements, hot water cylinder changes or insulation improvements. This helps create a more complete heating setup for the home.

Heat pump installers for Epsom, Surrey and South London

Areas we cover

Epsom
Ewell
Ashtead
Banstead
Cheam
Sutton
Leatherhead
Worcester Park